水草情迷

今天剛買了富華104濾桶,但跟足sales講去吸條出水管,但d水都冇被抽入濾桶,再嘗試跟隨說明書去做都唔成功..... 所以想問下大家怎樣才令濾桶順利運作?

你的濾桶內有冇放全水....才開制????
如果冇水...好易燒摩打o架.....

D水根本抽唔到入去ar......

首先要打開蓋...放D水入去...要滿才開制....唔係開制..吸D水入出

哦....即係話直接放木水入去??我都試過,但個濾桶個motor好鬼嘈,我怕起上來才關掉它.

一般濾桶係可以用原始方法做.
桶內冇水,駁晒喉,起出水位吸,等d水流入桶內至滿溢,再將條喉放回魚缸,開電制,通常work!

嘈係因為有空氣起摩打內!!!

_________________
願耶和華賜福給你，保護你。願耶和華使他的臉光照你，賜恩給你。
願耶和華向你仰臉，賜你平安。 民6:24-26

老通Tony

咁樣是否用個枝pump吸?我都試過,但d水吸唔到上去就跌番落去,根本入唔到個桶內.....所有我可否直接入d 水落個桶內呢??

I'm also using FUWAH. I find it's more difficult to use and I usually start the pump as follow:

1. U have to fill up the 濾桶 with water
2. U have to fill up the in-pipe by pouring water from the intake hole
3. U have to push and pull the "pumping swtich" forcesly for around 10-20 times
4. Power on the pump, and then push and pull again the switch again. It take around 15s to start pumping.

唔該哂你地呀!!我今日終於攪掂部濾桶啦!!! 不過真的是十分煩.....
再次感謝你們我幫忙!!