水草情迷

C兄大家好,

我個缸岩岩SET起幾日咋.不過有D問題想請教大家.1, 我D黑木決唔知系唔系凍死左呢,因為我前幾日同個C兄買既,不過買左返黎我未有時間開缸,所以放左系個桶到幾日,而前幾日又好凍啵.我依家望D黑木決覺得佢D色好似好黑咁.D葉又有D黑色野系度.系唔系唔要得架喇? 第二就系D六角台呀,我依家有DIY CO2架,不過佢地幾日都唔識嘔泡既.D六角台系其他C兄送既.來源不明. 第三就系D細葉皇冠,我見佢有D葉尾地方黃黃地又黑黑地,所以我就剪左D爛既部份,得唔得架? 第4就系六角台要唔要特別用D液肥先種得靚架? 唔該咁多位.

1. 黑木蕨你放桶到幾日..冇咩水流,光照同co2..狀態係會差d...但未至於死既...
你可以少少太黑太桃突既葉cut左先..留番少少葉同主莖..放落缸就ok.但需要一定轉水時間..其間有co2 轉水會易d同快d.....至於葉上既黑色野我諗你要照張相至有c兄答到你..
2.植物嘔泡除左co2同光照外..仲有水流...水流大既話d泡易沖散..你可以參考下先..另外..d草如果你唔係放落缸好耐..等下..植物都係生物..係要時間適應..
3.鐵皇冠..cut左果d少少唔會有咩大問題...轉好水慢慢會生番d新葉...

另外..可以講下你個缸既設備..等其他c兄可以就你既缸既設備去答你問題...

全屬個人經驗..有錯請指點..

唔該C兄,多謝你既意見.小弟個缸 16 X 10 X 12. ADA 1 代黑泥, T5 8W X 4, EHIEM 2213 爆E仔珠, 依家得4隻角螺,遲D再加D小精靈. 有DIY CO2,不過水面有D 好似CO 2 既泡泡系度唔散,系唔系正常架? 有冇C兄可以解答到?

"好似CO 2 既泡泡系度唔散" seems that the water flow is not strong enough and starts turning bad.

_________________
24"x12"x14" w/ Eheim 2026+Arctica Mini
GLO T5HO 24Wx2
Lighting: 12:00pm-9:00pm
CO2: 2+ bubbles/sec
ADA Amazonia New

咁我可以點解決呀? 我個2213 系同另一個c兄買㗎.會唔會系2213 裡面D E仔珠太多呢? 唔該C兄幫手解答

Have you tried to clean the motorhead? Sometimes, those dirt will get clogged and affect the motorhead power. For your tank size, 2213 should be enough. BTW, have you connected it to a chiller/ pre-filter? Have you check the connecting pipes? There may be dirt, too.

_________________
24"x12"x14" w/ Eheim 2026+Arctica Mini
GLO T5HO 24Wx2
Lighting: 12:00pm-9:00pm
CO2: 2+ bubbles/sec
ADA Amazonia New