水草情迷

I am planned to make a steel stand for my HQI and the total weight of them will be about 40 kg. Since I will place them on top of the tank, Is there any ppl have experience about this situation. Whether the "担" of the tank can support it?
Thanks again!!

Although it may or may be not cause any real problem, but at this weight, you will worry every day, so ....

40kg 在缸面.. 見你的舊文, 好似成6呎半. 用多厚的玻璃 !? 成百磅在缸面, 缸唔夠實淨, 就日日驚驚呀..
其實 HQI 最重的是火牛部份, 如果是DIY的, 諗法子將 火牛分開, 就會輕好多, 唔駛加晒重量係缸面啦.

_________________
多多交流, 多多研究, 多多搜尋
我的水族相簿

Hi SuperCTW,

因為女朋友唔俾做6呎半(佢話太大wor),
又唔俾打拉爆 -.-
所以依加切左1呎,得番5呢半炸(66x26x26),
又要另外做個架頂住支HQI...
個缸用左4分玻璃做,
有8條"担",
我都有問過川河d"担"掂唔惦,
佢就話得(可能賣花讚花香), 但係我都想聽多d意見呢,
因為唔想缸毀屋亡呀...

另外,支HQI係arcadia的2x150W,
所以分唔開個火牛呢...

其實仲有好多野想問呢,
因為第一次用HQI, chiller, canister, soil.........
不過我諗住用多幾個月去攪清楚d野先俾魚仔人伙la.

吊燈得唔得?

女朋友唔俾吊,
話整爛d牆wor...

我個66吋缸都係缸面放燈plx6枝,四十磅一定有,但放在邊位角位好過靠Ｄ玻璃"擔".最重要係Ｄ力點落地,個架夠力嗎?

話俾你聽夠你都唔好咁做啦!
成 90 磅力咁樣壓在缸頂
再加上缸內的水壓
個缸唔即時爆
都係遲早的事
你以為 4 分玻璃好厚呀?
強化0左都唔係好穏陣咋
何妨你個缸一定無做強化添
將個加做大少少座枱面好過啦!
唔好靠個缸做力喇

But my cabinet is the same size as the tank,
so there is no other space for the stand.
Is there any other suggestion?
Maybe I need to re-design the stand again....

To太陽草老人,

The stand is made of stainless steel by a shop in reclamation st.
I think it is strong enough for the weight of HQI.

不锈鋼一定夠力
但也好重
所以點解魚缸用的燈盤大多用鋁材做
就係因為唔想個魚缸承受咁大力

唔係最好的方法但一定o店就係去實惠買個組合架,把燈吊在架上,因為HQI最好離水面40cm,這樣光照最平均且散熱快!

Oh! you should solve what really caused the problem, in your case, it is no doubt the problem is your "girl friend", solve her Man!

Thanks all, the problem has been fixed now since I have got the permit from my gf...

有時拿permit都幾煩...