水草情迷

i open CL-85 case and test give power to 風扇 can rotate....

Is any electronic parts on CL-85 controller damaged?

Thx.

Haaa.....after reconnect all CL-85 controller cable then 風扇 work again.....

Maybe bad contact problem.......*sigh*

Finally discover CL-85 original FAN not stable..... go to SSP buy second hand PAPAST 24V DC FAN to replace (Made in W-Germany). Only $30.

W-Germany... 起碼 17 年老…… 不過係魚街最近我都見過有鋪賣既 Eheim 泵都係寫 W-Germany…

_________________
Bye Bye Mash BB! 你要保重， 你永遠係我既乖BB。

I checked "Wa Fai" no same voltage and size FAN. Most is 12V DC or 25mm......
My FAN is 120mmx120mmx38mm 24V DC.
They said no stock now....need until middle of May.

I also try to found it in "Wo Hing".... i found one same as my CL-85 FAN but Made in HK and need around $67.

I'm not sure that Hong Kong brand FAN quality...... so use $30 buy PAPST....
I think W-Germany quality should be better than China and HK.

And the FAN label show it is IBM parts.... seems maybe server FAN or something like that.

PAPST風扇是SSP邊間買呀?
我在"Wo Hing"買了一把Made in HK DC24V 0.35A
但CL85把風扇是DC24V 0.2A
PAPST風扇是DC24V 幾多A啊?
是不是寸半厚?

that PAPST not new FAN .... is used parts and take from IBM machine.

I buy it in SSP near end of Ap Liu Street 街边檔.

In Ap Liu Street only one 街边檔 sell FAN. You try to find.

Hi waffen-ss,

Is your CL-85 also replace FAN? How long of you CL-85 used?

新買.用了1星期後風扇間唔中有聲,所以想換風扇.

Why not sent to repair?

好重 風扇間中有聲是小問題.

只想知換風扇 0.35A可唔以,因舊風扇是0.20A

i'm using PAPAST FAN just label use 3.5W and work smooth.

Normal small different of 0.2A is ok.

唔該曬
等我放假有時間就換左把風扇先

Next time try around New Reclamation Street and Shanghai Street. More choices, more professional, and cheaper. Ap Liu Street really has turned into a tourist attraction for local 自由行。

_________________
Bye Bye Mash BB! 你要保重， 你永遠係我既乖BB。