水草情迷

想請教一下，CO2 細化器應該放在魚缸內那裡是比較好？可以讓 CO2 在缸內更完全。會是濾桶的出水位還是入水位？或什麼地方呢？

其實你放係缸既下層就ok...
放前後左右只係你鍾意...

the place can let the co2 stay in tank for longer time
and get water flow to bring co2 to most part of the tank

it is the best

_________________
友朋知所剔，何患少交遊。

出水口下面

我放出水口對面

_________________
缸24''X13''X18''
ATMAN 鹵素燈 MG 600 , 9W UV燈
海利 HC- 300A , CO2 1KG鋁樽
濾桶Project ARGO 2,富華405

x2

Some bros suggest to place it right next to the filter inflow-hole => this can increase the dissolving % by getting the CO2 travel all the way through the filter and then back to tank. I think that make sense
(but need to place it carefully so that most bubbles are absorbed by the filter!)

x2

Some bros suggest to place it right next to the filter inflow-hole => this can increase the dissolving % by getting the CO2 travel all the way through the filter and then back to tank. I think that make sense
(but need to place it carefully so that most bubbles are absorbed by the filter!)

謝謝各位，但有小小不明白，出水口下面和對面的分別？即係雨淋管下面？

這個意思似乎係放在濾桶入水位旁，把CO2 引入濾桶內？但濾桶入左氣不是不好的嗎？

I'm not sure. Maybe the bubbles have already been "細化", there seems not much adverse impact to the pump! (Correct me if I am wrong!)