水草情迷

我想找一些很薄的膠鏡(反光度和玻璃鏡一樣,只是那是膠制的,很薄,不是鏡膠板)

膠鏡&鏡膠板有咩分別?

鏡膠吾反光,一塊塊板

總之我想搵d好薄既鏡面膠片

和豐國際貿易有限公司
上環 建安商業大廈
電話：2543 4405
九龍分公司膠業部
大南街 207
電話: 2393 4641
佢有間買膠片的門市部在深水埗大南街有門市,我早兩個月先買咗塊,差唔多二百,尺寸好似4'x 8' ,不過無得散剪。

_________________
"一起推動水族設景潮流, 集思廣益, 雅俗共賞。"
Life is to enjoy.....

utopia13,
Are you find the one like this?
http://www.aqugrass.com./phpBB2/viewtop ... highlight=

The "鏡膠" I used is just normal transparent 膠片, with Mercury at the base.
As my last diy light box, the boss said the 薄既鏡面膠片 has standard thickness, no thicker, or thinner around 1/8"

If you need only a few inch by few inch, go to any 膠片 shop in Mongkok or in SSP to find small pieces by luck lar.
The boss who made my diy light box said, the "鏡膠" is relatively more expensive than normal 膠片.

If you need much, like GWU said, go to some big 膠片 shop to buy the whole piece.

I bought a sheet of plastic mirror at a retail shop (North Point Ching Fung Street)at a cost of $30. It's 20" x 24" in area and 1/16" in thickness.

I intend to diy a hood with refector for the light but I find it difficult to be bended and have the shape fixed.

Any advice for me please. Thanks.

_________________
琉璃世界波光影 流轉逍遙逐水城
回首前塵疑是夢 迷濛醉眼羨魚情

warsar你個隻係普通亞加力膠片,我所講個隻唔係普通做招牌個隻硬亞加力膠片,如果係亞加力鏡膠片,大信都會有機會有散料,我講個隻係做display用,好薄,好軟,重薄過張身份証,大約祗有0.5mm厚,如果utopia13兄想要薄鏡膠片,哩隻實合用。

_________________
"一起推動水族設景潮流, 集思廣益, 雅俗共賞。"
Life is to enjoy.....

all........I see.....

咁薄可用風筒吹軟佢先屈,但要好有技巧,受熱部份太熱會軟晒好難定形,膠片鋪會用發熱線在要屈的界上加熱,好易就屈到要嘅形狀。

_________________
"一起推動水族設景潮流, 集思廣益, 雅俗共賞。"
Life is to enjoy.....

GWU
係呀,我想要你講個隻
我係d玩具入面見過,但就係吾知係邊買,一來整led燈用,二來公司都要用一d
不過4'x 8'...真係多到好可怕

GWU
講真,你買左整野有冇多?
有既不如轉手賣比我