水草情迷

新買Eheim classic 2213
第一次試時成功啟動,再開時開頭5分鐘有水出同有kaka聲, 5分鐘後就冇水出, 請問是什麼原因?

thx！

谷鬼氣。
入水位吸到氣，吸埋吸埋咪出唔到水囉。(我諗係掛，因我冇用過你隻濾水器)

拆左再裝好左, 有水出, 不過係勁細水流, 都係咁嘈, 請大家幫忙!!

THX !!

你係唔係咪放咗好多嘢落去呀...........

_________________
潚潚灑灑的向前走,別要向後看!!!

0 濾材都係咁

濾筒是否與魚缸同水平平排?

kaka聲.........because water not fill up to the motor level, so motor cannot push the water back to your fish tank. Therefore you need to first of all close all valves of Ehiem filter. Fill up the inlet and outlet green plastic pipes with water and connect with the Ehiem filter and trun on the valves, try to relocate the filter lower than the fish tank, then turn on the filter........

I have try this for many times ? Can U expand this more detail ? Thx !

你可以抽全水入濾桶...才開制

oh......sorry I am using 2222 so different from you.

Generally, you need to let as less air as possible in your filter. How to do so?........
1. You connect every things, including the upper outlet pipe, lower inlet pipe. f
2. ill up the filter from the outlet pipe slowly, and air will escape from outlet pipe,
3. when you see water coming out from outlet pipe, water should generally fill up the filter. Then,
4. put you inlet pipe and outlet pipe in side you tank, and
5. the preferably filter under your tank
6. turn on you filter motor,
7. shake shake shake you filter.

detailed enought?

唔單止濾筒要滿水,由入水口至濾筒前果段喉都要設法令佢滿水,如果唔係你一開pump就會扯咗D空氣入濾筒架啦。要令入水口至濾筒果段喉滿水好易,就係張果段喉全條放入水中,然後先關水閘,到駁好所有喉先開個pump最後先開水閘,重要係先開入水個閘,最後先開出水閘咁就萬無一失啦!

_________________
"一起推動水族設景潮流, 集思廣益, 雅俗共賞。"
Life is to enjoy.....

Eheim website 有教點 prime filter 的， 去睇睇。

重點係要放哂 filter 既水， 安喉後， 出水位保持在水平線上 (否則是 prime 唔到水的)， 直至開泵為止。 filter 的摩打一定要低過水平線， 然後用口 (或其他器材， 要買的) 吸出水位， 吸到開始虹吸入水至濾桶， 水吸至高過摩打位就可開制， 開制後勁搖個桶搖走 D 氣。 大流量的桶久唔久會有氣， 是正常的， 因為摩打快速轉動會由水中打走一些氣， 耐了就會有聲， 通常一陣就自動泵走， 泵唔走或想即刻無聲又可搖下佢就掂。

ThX All, I will try ....

今日我張個筒帶左去鋪到試, 原來不是我的問題而係個磁芯斷左......
多謝大家的幫助, 今日會返去按裝.

間店鋪肯立即換返支磁芯? 過程麻煩唔麻煩?