水草情迷

it is easy to cut by hand saw, the middle layer is soft seem like plastic

我今日去過,買左件 4呎x1呎, $20,個老板仲肯同我界開3件,3吋,3吋,6吋.我覺得應該幾好,輕過亞膠力膠片.我聽日 diy 光管, 試試 ok 唔ok.

呀,,仲有....塊板入面係鏡片黎..少少花..可以接受...ok 啦

湯米:

冇錯，唔要積梳都可以，左右兩端唔留，留邊上下邊闊小小，夠位上鑼絲就可以!!

我整好左支燈啦....d鋁塑復合板可以用手工鋸都鋸到架

係米好省鏡呢，無介紹錯

干,靚,正,....不過我就冇用膠水,因為唔知用咩膠水.
另外我買了條碰條..用黎托住塊擋水, 用膠水好似唔係好得.

係[平]..不是[干]

i bought a piece ( 2'x2' --- $20 ) last saturday, but i have no idea how to make my case. siubox hing, can u post your case's photo here for my reference?
many thx!

pat : 我係用 鋁角和拉釘做架...你有冇拉釘..冇可以用鑼絲

試下 paste 個圖:

TOny 仔, where can i buy 拉釘 , how much and how to use?
thx!

五金鋪有售.拉釘要用個拉釘鉗先可以拉到,d鋁window成日用..幾錢唔記得...但係都要鑽鑿架..用既時候係...1)鑽鑿..2)放入拉釘...3)用拉釘鉗拉實2件野.(個鉗既packing後面有寫)

is 鑽鑿=鑽 ?
will the whole set > $100 ?
thx again!

鑽洞...應該少過100...因為個鉗..有平有貴...貴既都唔>100