水草情迷

個connect 位. 就0甘 "sip" 條線入去? or 會再fix 死佢?? 好似唔多實...?

係咁拮入去wow, 佢預你用單芯銅線架,如果你用幼絲線,可以先用錫焊埋D線再插入, 或者去電子零件鋪買細既銅碼仔, 夾實D銅線先插入去。

_________________
"一起推動水族設景潮流, 集思廣益, 雅俗共賞。"
Life is to enjoy.....

Thanks but where can you find 單芯銅線?

軟線都得 --
開線口, 用電烙鐵加錫, 電線食完錫就變硬 --- 如圖:

_________________
倒錢落咸水海中

I bought 單心銅線 already la...
the 單心銅線 is very very hard.

想問下你地整外置牛 , 4Xt5ho total 16條單心銅線 入返燈廂,味好大條???

又粗又hard... 16x 單心銅線.....???

Hi, can you share your DIY lighting when you've finished? Waiting...

Have u ever seen this one before?
viewtopic.php?f=29&t=104755

_________________
倒錢落咸水海中

老師鮮師

I have 單心銅線 already la... (1.5mm)
the 單心銅線 is very very hard.

想問下你地整外置牛 , 4Xt5ho total 16條單心銅線 入返燈廂,味好大條???

又粗又hard... 16x 單心銅線.....???

你地會點handle? 用"湛肉" 轉幼線???

如果是外置火牛, 我估用軟線好一些, 就算用單心銅線都不需1.5mm的.
還有, 接駁電子牛時, 應該有部份接駁位是並聯的, 所以未必要放足16條.
可否給你的設計圖我看看, 再研究你單case?

_________________
倒錢落咸水海中

This is my Design la.
電子牛外置的.
total 14 電線入燈箱.

http://picasaweb.google.com/lh/photo/l9c-C3X5WWg7lgrxrClGxA?feat=directlink

明白.
Total number of lines: 6(T5HOx2)+6(T5HOx2)+3(電線L+N+G)+1(電線L)[where G&N is connected in parallel]=16.
L line is needed to connect switch for individual switch on/off otherwise you can switch all 4 tubes on or off.
Is above correct? If so, I suggest you use soft power cables.

_________________
倒錢落咸水海中

actually does the pin no.4 needed to be connect back to the ballast. 個圖話要, but if 並聯又好似冇甘既須要..... 究竟no.4 要返牛嗎??....

Both 3&4 都要駁返牛的.

_________________
倒錢落咸水海中

Mine is not like this ga!!
Mine have 7 output slot. please take a look in the PDF attached.
Thanks alot!!!!!

Oh! I see.
了解左. 7係要駁返去電子牛的.
帶出另一問題 -- 隻電子牛點解唔裝響光管架上 ? 唔洗搞禁多野喎.

_________________
倒錢落咸水海中