水草情迷

我個缸只得15"X10"X12",我都想有個30"缸,可惜冇地方
後:AA燈箱用NEC 10W三波長管
前:PML 11W改Toshiba 27W三波長PL管
光度總算ok

小弟自己 diy 的 , 原來27w 的 改為 55w , 各位見笑 !!

幾好喎!你個缸幾大,要有三支嗎?
個火牛及燈管何處有售及幾錢?

Hi , ken
火牛就去電器器材買 , 大概30幾元 , 支燈魚街卡記買的 , 我個缸係24"
三支燈合共 165w , 三支燈因為在第三次世界藻類大戰時壞晒 , 全部受水氣所害, 所以全部自己整過晒 , 中間支燈殼係得22吋左右,所以55w pl 己經頂晒頭 !

Toshiba 27W 3-bands, i think it is 6500K

To 新草缸魚仔:
請問你是3支一齊開嗎? 效果如何? 熱唔熱?

嘩好危險呀! 小心家人觸電喎.

唉! 又一個活生生的例子
毫不考慮安全問題

喔.. 火牛貼在燈殼上, 而且又在魚缸頂. 漏電的機會都幾高, 加多個鋁箱將火牛放在裡面, 在擺係離開魚缸會安全o的呀.

_________________
多多交流, 多多研究, 多多搜尋
我的水族相簿

眼見火牛完全無接青線
鋁殼又無接青線
電死都唔知乜事
最慘係呢 D 情況大多係其他人電死
本身安裝者一定無事
因為佢自己一早就知有危險

Cybercatt:

Don't say too much la... You have remind other so many time here to say about the danger of electric equipment self-modification ... I think it's so enough, people never got learning until accident happened...
Don't waste your "gas" la............

kit

Maybe should put a sign nearby "Danger! do not touch"

To 新草缸魚仔:
I think u should at least earth your light. Connect the earth wire to the 鋁殼. Try to cover up the ballast, starter etc as it is very easy to spill water onto them.

Just a thought: why don't u use electronic ballast, since u r already diy? Those magnetic ballasts are heavy and bulky!
I replace my 27W magnetic ballasts with e-ballast, much brighter now. Actually the ballst in my cyberaqua(27W) light is only rated as 25W, and it is driving the 27W PL tube!!

你上面d燈, 電線同火牛外露咁肉酸, 下邊缸魚點靚都無用啦!

參考連結:

http://www2.aqugrass.com/phpBB2/viewtopic.php?t=1672&highlight=