水草情迷

我個DIY co2工作了一天,現在唔出氣(要按實才出,是否膠瓶壓力不足)?要如何解決始步驟?? 謝

你可唔可以講埋用左咩樽, 點整咁呢.

_________________
多多交流, 多多研究, 多多搜尋
我的水族相簿

百佳牌1.5公升膠瓶(膠質料不詳)

用1斤糖,然後加熱水(約37.5度),再加乾依士粉,再加熱水(約32度),1小時後開始出co2直到今日

8:30pm就不出co2,要手動壓才出,有沒有那步驟出現問題??

reason is the not enough pressure inside bottle, since yeast nearly eat all the sugar.
you press the bottle then the pressure is increase, so bubbles will go out.
after you release the pressure is lower, so no bubbles.

you shall stop to press the bottle, and wati then the pressure increase inside will release bubbles.
or you shall make another diy co2 if still no bubble.

_________________
友朋知所剔，何患少交遊。

百佳牌1.5公升膠瓶.....可能會漏氣ga........
我之前曾用過其他膠樽....出唔到泡...
用左汽水樽就得la....