[分享] 升級爆殖場

gn01628968 · **註冊時間:** 2006-02-02 11:48 **文章:** 297

大家有意見??

angelyoyo · **發表於 :** 2006-04-09 02:12

24吋分5格有D迫喎

hangon · **發表於 :** 2006-04-09 14:29

http://hk.f2.page.auctions.yahoo.com/hk ... n/b3853300

這個缸都可以考慮吓

puretung · **註冊時間:** 2006-02-02 19:23 **文章:** 255

24"分5真係好迫,睇蝦都睇得唔方便
如果fix死左24",最多分4,同埋唔好造咁高

lomofisheye · **發表於 :** 2006-04-24 16:42

分兩格law

ShrimpTheLittle · **發表於 :** 2006-04-24 17:14

爆蝦時,你就會知d蝦b有多大能耐,你想左住佢地游泥游去都好難

gn01628968 · **註冊時間:** 2006-02-02 11:48 **文章:** 297

ShrimpTheLittle 寫:

爆蝦時,你就會知d蝦b有多大能耐,你想左住佢地游泥游去都好難

有無咁"梗"???

lomofisheye · **發表於 :** 2006-04-25 09:12

To me, the mainpoint is to screen out those adults in order not to breed freely, i will let those bb to squeeze in and out between the partition.

ShrimpTheLittle · **發表於 :** 2006-04-25 10:24

gn01628968 寫:

ShrimpTheLittle 寫:

爆蝦時,你就會知d蝦b有多大能耐,你想左住佢地游泥游去都好難

有無咁"梗"???

d板會係直入缸底隔開晒d泥?如果只係去到係泥面,d蝦有能力掘起d泥,咁樣佢地會捐到過隔離~~~另外d板會唔會高過水面,高唔過,d蝦又會游過去隔離,唔夠高,d蝦又有可能彈過去隔離.

最後,如果d板能夠直入缸底(或深入泥底)又高過水面好多,做到真正的一格格,咁水流又如何呢?

lomofisheye · **發表於 :** 2006-04-25 10:36

ShrimpTheLittle 寫:

gn01628968 寫:

ShrimpTheLittle 寫:

爆蝦時,你就會知d蝦b有多大能耐,你想左住佢地游泥游去都好難

有無咁"梗"???

d板會係直入缸底隔開晒d泥?如果只係去到係泥面,d蝦有能力掘起d泥,咁樣佢地會捐到過隔離~~~另外d板會唔會高過水面,高唔過,d蝦又會游過去隔離,唔夠高,d蝦又有可能彈過去隔離.

最後,如果d板能夠直入缸底(或深入泥底)又高過水面好多,做到真正的一格格,咁水流又如何呢?

FYR.

http://www.aqugrass.com/phpBB2/viewtopi ... highlight=
\
For example, to create water flow, the said case would need two filter, water inlet in one section while discharge in the other section. The cue is that there are small cracks in between the acrylic plate and the tank, and the plate is not penetrate fully to the bottom.

ShrimpTheLittle · **發表於 :** 2006-04-25 10:46

lomofisheye 寫:

ShrimpTheLittle 寫:

gn01628968 寫:

ShrimpTheLittle 寫:

爆蝦時,你就會知d蝦b有多大能耐,你想左住佢地游泥游去都好難

有無咁"梗"???

d板會係直入缸底隔開晒d泥?如果只係去到係泥面,d蝦有能力掘起d泥,咁樣佢地會捐到過隔離~~~另外d板會唔會高過水面,高唔過,d蝦又會游過去隔離,唔夠高,d蝦又有可能彈過去隔離.

最後,如果d板能夠直入缸底(或深入泥底)又高過水面好多,做到真正的一格格,咁水流又如何呢?

FYR.

http://www.aqugrass.com/phpBB2/viewtopi ... highlight=
\
For example, to create water flow, the said case would need two filter, water inlet in one section while discharge in the other section. The cue is that there are small cracks in between the acrylic plate and the tank, and the plate is not penetrate fully to the bottom.

By using two or more set of equipments, why not build up two ore more individual tanks? Maybe save place and increase the reusability

Also, refer to the example, although the acrylic plate looks like inserted deep into the sand bed, the upper part of the acrylic plate got some cracks as you mentioned but baby shrimp is too small, they can pass through these cracks easily~~~

lomofisheye · **發表於 :** 2006-04-25 11:25

ShrimpTheLittle 寫:

lomofisheye 寫:

ShrimpTheLittle 寫:

gn01628968 寫:

ShrimpTheLittle 寫:

爆蝦時,你就會知d蝦b有多大能耐,你想左住佢地游泥游去都好難

有無咁"梗"???

d板會係直入缸底隔開晒d泥?如果只係去到係泥面,d蝦有能力掘起d泥,咁樣佢地會捐到過隔離~~~另外d板會唔會高過水面,高唔過,d蝦又會游過去隔離,唔夠高,d蝦又有可能彈過去隔離.

最後,如果d板能夠直入缸底(或深入泥底)又高過水面好多,做到真正的一格格,咁水流又如何呢?

FYR.

http://www.aqugrass.com/phpBB2/viewtopi ... highlight=
\
For example, to create water flow, the said case would need two filter, water inlet in one section while discharge in the other section. The cue is that there are small cracks in between the acrylic plate and the tank, and the plate is not penetrate fully to the bottom.

By using two or more set of equipments, why not build up two ore more individual tanks? Maybe save place and increase the reusability

the advantage is that you dun need to take any acclimatization procedures when you depart the grades of your shrimps.

Also, refer to the example, although the acrylic plate looks like inserted deep into the sand bed, the upper part of the acrylic plate got some cracks as you mentioned but baby shrimp is too small, they can pass through these cracks easily~~~

Concur, as what i mentioned earlier, the 1-2mm crack is large enough for a shrimp B to getting through, but it works for the purpose to avoid unwanted breed.

水草情迷

[分享] 升級爆殖場

誰在線上