水草情迷

is that anyone know which EHIEM濾桶 model is good fit for 24" tank ...... I want to buy one, and how much is it?

Thanks

any EHIEM model can fit 36" tank ..... 日後換大的缸都吾洗買過啦?

pls advise .....

http://www.eheim.de/eheim/inhalte/engli ... 18173_ehen

You need to calculate your capacity H * L * W and then the website can tell you which model fits your capacity

Thanks 4 Lo

Do you think this brand is good and reliable ..... no water falls out?

EHEIM 濾桶, 36" 用 2028啦, 唔會後悔.
找找 "eheim" 就知係咪 good and reliable 啦. 嘿嘿

_________________
多多交流, 多多研究, 多多搜尋
我的水族相簿

every brand needs proper use. The most common problem is the rubber ring at the junction (like the connector to hose), each time you clean them, make sure the rubber ring is back to the normal position. I have once water leakage when I finished the cleaning and turn on the power, just because the small rubber ring is 'off' the normal position (in the 'out' hose). And also the way to re-start when you also clean the in and out hose (which you will lose all the water in the hose), you will need to "suck" in the "out" hose so that the "in" hose will be full of water again. You can use your mouth ( try not to) or using some connector to the sucking pipe you use for cleaning.
When you do the above with your mouth, make sure the pump container is NOT full, may be half-full, so that when you suck, water will NOT directly suck into your mouth and you have enough time to connect the hose back to the pump.

Hope this can help

Thanks for you guys information, I'm keeping a 24" tank and want to move to 36" tank later ... that's why I want to buy one 濾桶 - (say like)Eheim 2222 to fit 2 tanks ....??

Which shop in FS is good price for ehiem, pls advise again?

2222 可能唔夠你第時個 36" 缸用啦, 而且係舊款桶, 引水入桶較麻煩.

建議你有位就買2228或者 2028, 反正可以用水閘控制水流量.
魚街其實都公價晒, 係大x礁同發記會係水貨, 平些少. 其他就靠你口才啦.

_________________
多多交流, 多多研究, 多多搜尋
我的水族相簿

Thanks guys for you help !!