幫手搵濾桶

caho28 · **註冊時間:** 2010-02-01 11:48 **文章:** 56

小弟現有設備如下
120x50x50cm
eheim 2260垃圾桶推水冷,
Atman cf1200 推co2擴散桶及養菌,
已用了3年,近來覺得Atman個桶好似疴尿都好力過佢,心思思想換.係淘寶見到隻eheim2217,1000L/hr,包濾才,買人仔620好似幾好,各位有何建議?或者有何另類選擇呢,小弟應該唔會再用大陸牌子,請幫幫手!

溫度計 · **發表於 :** 2010-03-11 16:51

我都用緊依個筒差不多三年,唔覺有問題.

達官貴人 · **註冊時間:** 2009-06-07 01:47 **文章:** 63

你有冇洗桶?冇洗就緊係冇力啦

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

2217 is good & worth for money if you compare to the new version. i don't think it is nessary to pay more for those bucket filter layer & additional function. save $1000 can buy some good filter material.
just bought one 2217 yesterday in hk for 950 included filter material. i don't know if china comes with eheim mesh & ball.

ahtock · **註冊時間:** 2010-01-22 02:33 **文章:** 13

我昨天剛買左兩個2217水貨，$740包原裝配件&濾材，計過數連車錢同時間，都係俾人地賺少少，好過自己搬餐死既 :grin:

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

ahtock 寫:

我昨天剛買左兩個2217水貨，$740包原裝配件&濾材，計過數連車錢同時間，都係俾人地賺少少，好過自己搬餐死既 :grin:

where so cheap?

Andy Kong · **發表於 :** 2010-03-13 18:45

ahtock 寫:

我昨天剛買左兩個2217水貨，$740包原裝配件&濾材，計過數連車錢同時間，都係俾人地賺少少，好過自己搬餐死既 :grin:

連原裝濾材就超 jet-so，但好多時水貨都係跟其他牌的環和棉的。

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

Andy Kong 寫:

ahtock 寫:

我昨天剛買左兩個2217水貨，$740包原裝配件&濾材，計過數連車錢同時間，都係俾人地賺少少，好過自己搬餐死既 :grin:

連原裝濾材就超 jet-so，但好多時水貨都係跟其他牌的環和棉的。

mine is included eheim mesh and substrato pro.

jadob · **註冊時間:** 2007-11-09 14:53 **文章:** 162

我個CF1200用左兩年半都重有八成功力喎....
你可能冇定時洗個磁芯啦(半年一次)

ahtock · **註冊時間:** 2010-01-22 02:33 **文章:** 13

leoo11 寫:

Andy Kong 寫:

ahtock 寫:

我昨天剛買左兩個2217水貨，$740包原裝配件&濾材，計過數連車錢同時間，都係俾人地賺少少，好過自己搬餐死既 :grin:

連原裝濾材就超 jet-so，但好多時水貨都係跟其他牌的環和棉的。

mine is included eheim mesh and substrato pro.

The two I bought included original mesh and substrate pro, instead I bought together one 2215 with original mesh and substrate pro as well at HKD645

Prices in SZ is cheaper still after exchange to HKD, but I'd rather let someone to take small profit and take back to HK

ahtock · **註冊時間:** 2010-01-22 02:33 **文章:** 13

leoo11 寫:

ahtock 寫:

我昨天剛買左兩個2217水貨，$740包原裝配件&濾材，計過數連車錢同時間，都係俾人地賺少少，好過自己搬餐死既 :grin:

where so cheap?

My friend works in SZ and back to HK every weekend, he is doing some freelance job like 水貨客

ahtock · **註冊時間:** 2010-01-22 02:33 **文章:** 13

Andy Kong 寫:

ahtock 寫:

我昨天剛買左兩個2217水貨，$740包原裝配件&濾材，計過數連車錢同時間，都係俾人地賺少少，好過自己搬餐死既 :grin:

連原裝濾材就超 jet-so，但好多時水貨都係跟其他牌的環和棉的。

Andy 師兄，我雖然少在這裡發問，但情迷所有既post我都爬得乾乾淨淨，差不多兩個禮拜，晚晚放工就開始爬，唔爬過訓唔著 :grin:

學到好多，亦好 APPRECIATE 各位師兄個種不厭其煩，無私奉獻既精神，真真欽敬 :grin:

小弟亦已經部署緊開一個36"缸，硬件已經準備得7788，依家只係差支燈，因為找工廠訂做LED，所以仲需要多少少時間，預計長假期開始落手攪，到時會將開缸過程上載情迷，俾各位大師兄狠狠批評一下，還望不吝賜教

作為一個新手，紙上談兵已有好幾個月，實戰在即，反而在構思造景方面遇到樽頸位，畫了十多幅素描初稿都不甚滿意，真正感受到睇和落手做是完全兩碼子的事，各師兄們的功力及經驗真不是三兩個月就可以依樣葫蘆般照抄可也 :redface:

再一次說聲拜服

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

ahtock 寫:

leoo11 寫:

ahtock 寫:

我昨天剛買左兩個2217水貨，$740包原裝配件&濾材，計過數連車錢同時間，都係俾人地賺少少，好過自己搬餐死既 :grin:

where so cheap?

My friend works in SZ and back to HK every weekend, he is doing some freelance job like 水貨客

really. do you mean that he take profit by bring goods to hk for 水貨客?
I am actually want to buy 48" hqi from china. what is the service charge. :grin:

would he able to pick it up from the shop?

ahtock · **註冊時間:** 2010-01-22 02:33 **文章:** 13

leoo11 寫:

ahtock 寫:

leoo11 寫:

ahtock 寫:

我昨天剛買左兩個2217水貨，$740包原裝配件&濾材，計過數連車錢同時間，都係俾人地賺少少，好過自己搬餐死既 :grin:

where so cheap?

My friend works in SZ and back to HK every weekend, he is doing some freelance job like 水貨客

really. do you mean that he take profit by bring goods to hk for 水貨客?
I am actually want to buy 48" hqi from china. what is the service charge. :grin:

would he able to pick it up from the shop?

I'm indeed not so familiar with the equiment, so does my friend! He brings anything back as long as you provide him details of the item, where to buy, he will then do the sourcing and negotiation job to look for the cheapest.

He usually charge around 10% if the item below RMB1000, less than 10% for expensive stuffs, PM me for details coz I'm not in that business, just try to help

Holiday · **發表於 :** 2010-03-16 10:54

ahtock 寫:

作為一個新手，紙上談兵已有好幾個月，實戰在即，反而在構思造景方面遇到樽頸位，畫了十多幅素描初稿都不甚滿意，真正感受到睇和落手做是完全兩碼子的事，各師兄們的功力及經驗真不是三兩個月就可以依樣葫蘆般照抄可也 :redface:

再一次說聲拜服

實戰咗, 就知唔係咁難, 亦無想像中咁復雜, 紙上談兵係太空泛 :stnose:

開咗缸就post上來, 等師兄/姊幫你執執 :ahahaha:

水草情迷

幫手搵濾桶

誰在線上