水草情迷

Hello 大家好,

有問題想大家比D意見,
我用緊 30" 130L 左右嘅缸, 及 P30 慮桶,
因地方關係, 會轉 24" 65L 左右嘅缸 , 同時都想轉個細D嘅慮桶 及LED 燈

濾桶方面
或轉 eheim 2111/2113 , 但係見 2113 個 size 同我而家個 P30 差唔多, 但始終都係細 DD,
2111 個 size 幾好但又怕唔夠用....定係唔洗轉....想問下大家意見


LED 方面,
search 個post 見到有 T8 嘅 LED 管, 睇落方便, 打算就買個 T8 燈罩（4管 maybe) 就換呢隻LED T8,
但就係想問下呢種 LED 管得唔得, ? 係咪鴨街有得賣?有無短 size 的?

Co2 方面
錶頭已經有la...想問下有乜細化杯推薦?

唔該...

_________________
ADA and Apple are my best friends. !!!

1. For canister, you should have at least 2215. If you're going to connect it to a chiller, 2217 is preferred.
2. For LED, let other c hings help. But personally, I'd prefer T8 tubes for you case.
3. Go to 水木x森, around $90 each. The bubbles are very fine. The old version requires 4 bar CO2 pressure, but the revised version has no minimum requirement. Otherwise, UP diffuser is already good enough which costs $12-$15 each.

_________________
24"x12"x14" w/ Eheim 2026+Arctica Mini
GLO T5HO 24Wx2
Lighting: 12:00pm-9:00pm
CO2: 2+ bubbles/sec
ADA Amazonia New

Thanks for reply.
1.因為我都用緊 P30, 如果轉個差唔多嘅size 好似有點浪費, 若然 2213 都夠用嘅就2213, 暫時未有考慮加水冷，除非師興覺得好唔夠.
2.For 燈, 請問為何不prefer T8 for my case ? 有無原因的? 出面套裝 LED 好貴又弱, DIY 自己又唔多能手.
3.係咪 ISTA 果隻?

Thanks

_________________
ADA and Apple are my best friends. !!!

songallery:
1.因為我都用緊 P30, 如果轉個差唔多嘅size 好似有點浪費, 若然 2213 都夠用嘅就2213, 暫時未有考慮加水冷，除非師興覺得好唔夠.I'd say 2213 is far below the standard.
2.For 燈, 請問為何不prefer T8 for my case ? 有無原因的? 出面套裝 LED 好貴又弱, DIY 自己又唔多能手.No, I didn't say "不prefer T8". I said "prefer T8".
3.係咪 ISTA 果隻?No. I mean the one as per the attached photo.

_________________
24"x12"x14" w/ Eheim 2026+Arctica Mini
GLO T5HO 24Wx2
Lighting: 12:00pm-9:00pm
CO2: 2+ bubbles/sec
ADA Amazonia New