水草情迷

應該點樣Check漏氣? You may use diluted liquid soap and put it on each connection point. If you find air bubbles coming out, there's leakage.
計泡器真係standard size嗎? 但那條專用喉真的接唔到落去-__-‘’ Any photo? Or, you may try another one (either the bubble counter or the CO2 pipe).
Check valve是止流閥嗎? 我有一個$5 buy in FS Yes. The good ones may cost hundreds. Anyway, Daz has check valve and you can buy two of them. It costs around $10 each. One installed before the bubble counter, and the other one after the bubble counter.
可以教我應該點樣入D水去計泡器到嗎? You can first connect the bottom part of the bubble counter. Then inject water into the bubble counter with a syringe. Then connect the upper part.

即係要買個好D的止流閥就會解決到水從計泡器流走的問題? Yes. But what's more important, you have to find out which part of your CO2 system is leaking.

我想問下計泡器同止流閥是否要相隔很近嗎? No need.

我剛剛係利x行買了一套雙錶頭的Co2, 但發現有一些問題.

我想問下Co2的微調是否很難調教嗎? 唔知點解我就算慢慢調教,一係就出好小氣, 一係就多到爆, 唔知係我的問題定個微調問題呢.
另外, 當我教到大約一秒一泡之後, 過左大約1小時後, 出氣量就開始小, 不能維持我當初調教的氣量, 這個情況應該是出了什麼問題?
最後是我關了電池閥, 等到無氣再出後, 然後嘗試再開番電池閥, 出氣量俾我關之前小了很多, 是電池閥問題嗎?

P.S. 我係卡X買了種玻璃直立式的計泡器, 發現利X行送我的專用喉不能接到計泡器(因喉洞太細), 是否要再買新的膠喉? (用熱水浸下條喉既接駁位先,會比較容易接駁)還有我想問下這種計泡器應該點入水, 因是直立式, 無論我點入水, 水都從上流到下, 留在計泡器內只有很小水(大約1/3到), 很難看到一秒多小泡, 正確方法應該要點樣做? (膠喉先接上止流閥,另一邊接上計泡器,再用針筒注水)

小弟真的十分苦惱中, 希望各位能俾俾意見