水草情迷

綜合水族資訊討論區
留言室 | 相片分享區 | 草圖-我的相簿
現在的時間是 2025-03-10 04:48

所有顯示的時間為 UTC + 8 小時




發表新文章 回覆主題  [ 33 篇文章 ]  前往頁數 上一頁  123  下一頁
發表人 內容
 文章主題 :
未閱讀文章發表於 : 2006-11-15 21:10 
離線
頭像

註冊時間: 2004-02-09 00:16
文章: 836
攪咁多,如果為慳錢的話就唔好啦!

如果為慳位就可以諗諗!


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-15 22:25 
離線
頭像

註冊時間: 2006-08-26 22:05
文章: 39
來自: 屯門
CHAN1717 寫:
敢點解唔買兩個小濾桶?or小掛濾

大的濾筒,更多濾材 ! :-n04


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-15 22:27 
離線
頭像

註冊時間: 2006-08-26 22:05
文章: 39
來自: 屯門
hihiday 寫:
攪咁多,如果為慳錢的話就唔好啦!

如果為慳位就可以諗諗!


為慳位 :-n04


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-15 23:16 
離線
頭像

註冊時間: 2004-01-17 18:45
文章: 2464
來自: 地球 - 大埔
用一個桶

_________________
養緊鯛、養緊酋長、學緊養鯛、學緊養酋長;日日學、點解學極都學唔完!

水族圖庫


圖檔


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-15 23:37 
離線

註冊時間: 2006-05-04 11:40
文章: 34
兩個魚缸同一水平應該做唔到虹吸喎...


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-15 23:42 
離線

註冊時間: 2006-07-07 20:13
文章: 290
來自: chai wan
xlam510 寫:
兩個魚缸同一水平應該做唔到虹吸喎...
但當濾水器吸左d水時,就唔會係同一水平,水就會經虹吸作用到較低水位既缸


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-16 00:05 
離線
頭像

註冊時間: 2006-08-26 22:05
文章: 39
來自: 屯門
sowt 寫:
xlam510 寫:
兩個魚缸同一水平應該做唔到虹吸喎...
但當濾水器吸左d水時,就唔會係同一水平,水就會經虹吸作用到較低水位既缸

避免滿溢 :-n04


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-16 13:26 
離線

註冊時間: 2006-09-18 13:01
文章: 86
I don't quite understand how the "虹吸喉" can get the pressure to "suck" water automically! :j

Two possibilites:-
(1) the two tanks are on different levels.

But then it is very difficult to synchronise the flow rate of filter with the flow rate of 虹吸喉 (since 虹吸喉 will continuously "suck" water from high to low due to gravity!!)

(2) the two tanks are on same level and are connected by a horizontal pipe below "擔位" so that the water will "leak" (by overflow, but not by sucking power!) to the the next tank!

But then must drill holes to the tanks and make sure the connections are properly sealed to prevent water leaking out the system!! Very troublesome! :k

That is exactly why I have not yet tried to build a barrack of tanks with a central filtering system myself!! :h


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-16 20:11 
離線

註冊時間: 2006-07-07 20:13
文章: 290
來自: chai wan
Ah_Chiu 寫:
I don't quite understand how the "虹吸喉" can get the pressure to "suck" water automically! :j

Two possibilites:-
(1) the two tanks are on different levels.

But then it is very difficult to synchronise the flow rate of filter with the flow rate of 虹吸喉 (since 虹吸喉 will continuously "suck" water from high to low due to gravity!!)

(2) the two tanks are on same level and are connected by a horizontal pipe below "擔位" so that the water will "leak" (by overflow, but not by sucking power!) to the the next tank!

But then must drill holes to the tanks and make sure the connections are properly sealed to prevent water leaking out the system!! Very troublesome! :k

That is exactly why I have not yet tried to build a barrack of tanks with a central filtering system myself!! :h

係第二個方法

條管在兩個缸上面橫跨兩個缸,唔使鑽孔


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-19 15:52 
離線

註冊時間: 2006-09-18 13:01
文章: 86
If by method 2, then water will overflow all over the place, not just through the pipe, my bro. :o !!


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-19 17:16 
離線
頭像

註冊時間: 2006-08-26 22:05
文章: 39
來自: 屯門
sowt 寫:
Ah_Chiu 寫:
I don't quite understand how the "虹吸喉" can get the pressure to "suck" water automically! :j

Two possibilites:-
(1) the two tanks are on different levels.

But then it is very difficult to synchronise the flow rate of filter with the flow rate of 虹吸喉 (since 虹吸喉 will continuously "suck" water from high to low due to gravity!!)

(2) the two tanks are on same level and are connected by a horizontal pipe below "擔位" so that the water will "leak" (by overflow, but not by sucking power!) to the the next tank!

But then must drill holes to the tanks and make sure the connections are properly sealed to prevent water leaking out the system!! Very troublesome! :k

That is exactly why I have not yet tried to build a barrack of tanks with a central filtering system myself!! :h

係第二個方法

條管在兩個缸上面橫跨兩個缸,唔使鑽孔



開始時侯水平面 缸A &缸 B 相同
濾水器開始抽吸,缸A水下沉,缸B水上升,當缸B水上升,水壓增加將水壓去低水壓既缸 A,咁兩個缸既水位會一樣 , is it right? :-n06


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-19 17:27 
離線

註冊時間: 2006-07-07 20:13
文章: 290
來自: chai wan
paulmeva 寫:
開始時侯水平面 缸A &缸 B 相同
濾水器開始抽吸,缸A水下沉,缸B水上升,當缸B水上升,水壓增加將水壓去低水壓既缸 A,咁兩個缸既水位會一樣 , is it right? :-n06
就係咁喇


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-19 17:42 
離線
頭像

註冊時間: 2006-11-01 16:18
文章: 73
來自: hk
兩個缸嘅落瀘筒喉都加個手揼,出水加個一出二但出水口要直徑小一點 :-n05

_________________
Hello


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-19 17:50 
離線
頭像

註冊時間: 2006-11-01 16:18
文章: 73
來自: hk
remark:兩個缸size及水平都耍一樣

_________________
Hello


回頂端
 個人資料  
 
 文章主題 :
未閱讀文章發表於 : 2006-11-19 22:41 
離線
頭像

註冊時間: 2004-08-26 00:26
文章: 7732
來自: 馬鞍山
Theoretically this is possible, and this is exactly what I have in mind when I saw your question.

However, there are indeed big risk, espeically due to unexpected blockage of the levelling "rainbow" pipe between the two tanks. A piece of 枯葉, a dead fish, or lumps of dirt at the entrace of "rainbow" pipe at Tank B will flood your tank B in no time.

If space is tight, even using hanging type filter is better then what you are proposing here. Remember this is an hobby, safety and consideration to family always come first. Flooding of aquarium not just kill your fishes or plants, but the water might hit a power extension bar, causing electricity short circut, or even fire at the worst case.

_________________
魚樂無窮的混養缸
viewtopic.php?f=33&t=67319

我的 60 吋 Community Tank 紀錄
viewtopic.php?f=5&t=66429

JazZ Cafe - 水族主題的蒲點
viewtopic.php?f=9&t=56663


回頂端
 個人資料  
 
顯示文章 :  排序  
發表新文章 回覆主題  [ 33 篇文章 ]  前往頁數 上一頁  123  下一頁

所有顯示的時間為 UTC + 8 小時


誰在線上

正在瀏覽這個版面的使用者:沒有註冊會員


不能 在這個版面發表主題
不能 在這個版面回覆主題
不能 在這個版面編輯您的文章
不能 在這個版面刪除您的文章
不能 在這個版面上傳附加檔案

前往 :  
Powered by phpBB® Forum Software © phpBB Group
正體中文語系由 竹貓星球 維護製作