水草情迷

你的應該是1.2KG, 1.2G 咳一聲都唔見左.........誇張的.....

hahaha..yes...i think it is 1.2 kg...
what should i do then?

而家你個錶頭讀數係幾多丫?

haha, 我早2日第一次有個valve, 就係唔識吹下2 邊睇下邊一邊係通既, 結果reserve 左插, 行左一陣, "咦, 點解無料到呢?"
之後聽到"bar" 一聲, 個valve 同條軟喉迫開左...
係有d 驚, 但係無乜事, 仲要我個valve 係玻璃, 但都無爛, 仲用得...

嘩 兄弟真好彩呀 In Out 攪錯佐只係甩佐條喉
其實會唔會爆玻璃呢?? 我以前試過被玻界襯手 所以係有小小陰影架

一排電插剩係一個有事，拖板常見問題，Due to Poor Workman-ship....
睇下Made in 邊度，可否提供一下，方便大家買拖板小心D。

or 你意思是電插底坐有事?

叉氣可以搵利發行，30叉氣 for < 1 kg. 經驗是很夠氣，有多冇少。

Search 一下情迷會搵到地址。

個樽係上個月七月二十三號買既,點解咁快就冇晒氣架? 係咪個錶壞咗呀?點先可以check到呀?定係漏氣呀?

試下大制實唔實，實既話有可能你大製開得唔夠，轉2、3圈應該可以。

前輩教落，co2氣壓會迫實大製，冇氣大製會好鬆。

再唔得只有攞去鋪整…慘。

希望幫到你

It is impossible to see how much % gas remaining by looking at the pressure.... The CO2 inside pressure will be always high until it is almost empty. Then the pressure will rapidly drop to zero very fast.

The CO2 under high pressure are in liquid form. The air pressure will be always high to keep CO2 in liquid form under room temperature - until all CO2 used up.

The pressure indication is more for safety measurement than measuring how much CO2 remaining...

Unless you have a very accurate weighting instrument...Then you may measure weight of entire bottle with liquid CO2 full and comparing with the weight decrease...Man! it is quite a challenge.

isn't the 錶 can show how much c02 is left in the 樽 . But now, the 錶 shows 0, but it still has c02 spreading. Does the 錶 have some problems?