水草情迷

你個魚缸下面得一枝擔
受力唔好~

如果咁問得, 可能都會訂造 ,
咁同師傅講放魚缸, 唔好用蔗渣板黐紙皮, 用夾板黐膠板好d, 唔駛一吋厚既板, 有返6分板都一定ok(我自己屋企36吋缸訂造個柜都係用4分板, 都冇問題 ), 中間再落多一塊食力板, 應該ok...
呢個係我自己既意見, 唔一定係啱, 有錯既請師兄指點...

一般魚缸櫃是以高壓扳制做(又名庶榨板),所成受既力只有挾扳櫃既7份之1,所以價$比真正用挾扳既櫃貴3倍,如果只是50L以下細缸用還可以,大過50L既缸,櫃會慢慢變形,時間係可以証實到的,挾扳櫃又分兩種類,貴的一種是以全6分扳做,當然,成受力最強,另一種係平少少的,祖國貨最常用的,4分扳挾2分扳,好睇唔好食,但此終都好過高壓扳(圖中的櫃是自已做的,全6分扳做的,所以我加左天頂架,所以比一般6分扳櫃更強)掙料$550 無計人工

_________________
1号缸Dazs:24x14x18.2号缸36x16x24, 1kg鋁樽CO2名人雙錶頭X2 ,海利HC-150A水冷,Turbo-Twist 3X 9WUV,Eheim2026.Eheim2028,Eheim1048,Atman MG600鹵仔,軟水樹枝X1,
新燈x20,金四間x10,飛狐X5,DNA X10,莫絲,大葉珍珠,太陽草,日本流水ホ

Definitely not in Fish Street if you want to custom make an aquarium cabinet. Even if you want to purchase a cabinet without buying an aquarium from them, they won't give really want to deal with you.

You can find local furniture shop nearby and ask them to custom make for you, if you tell them it is for aquarium, they'll know what to do. If you use 甲板 and if you do it correctly, 6/8" thick (6 分大蕊夾板) will work alright, and it would be better if the inside of the cabinet actually has a supporting 甲板 from top to bottom (kind of spliting the cabinet into left and right), otherwise you might need to add some beam under the top of the cabinet. If you use 壓縮板. depend on the density of the board, maybe 1" or 1.25" think will work fine.

_________________
魚樂無窮的混養缸
viewtopic.php?f=33&t=67319

我的 60 吋 Community Tank 紀錄
viewtopic.php?f=5&t=66429

JazZ Cafe - 水族主題的蒲點
viewtopic.php?f=9&t=56663