[問題]潛水泵會否推爆濾桶?

derekmrc · **發表於 :** 2006-09-11 23:53

本人有一個36"X18"X30"之草缸，約250L水，用緊一個"依涵"2028濾桶做過濾，本身缸水都算幾清，但係就有D微粒浮係水中，因近日想買個水冷機同UV燈，仲想令啲水更清，又覺得只用現在的2028推個水冷同UV燈唔係太夠力，所以現想買個"依涵"潛水泵用嚟推一個新濾桶(大陸桶)及水冷機同UV燈。

1. 請問如果我買個潛水泵1200L/h-$660會唔會唔夠力?
2. 但係如果我買個潛水泵2400L/h-$990泵又會唔會令個濾桶壓力過大而令漏水或爆桶呢?

秋葉 · **發表於 :** 2006-09-12 10:15

一個濾桶推水冷,一個濾桶推UV
咁咪唔使加潛水泵囉

derekmrc · **發表於 :** 2006-09-13 22:13

因為計過數咁好似平啲

Andy Kong · **發表於 :** 2006-09-15 05:42

你打算點駁法？潛水泵推瀘桶？用 1200L/Hr 都有機谷爆。

可能初初 setup 會好順，但用了兩三個月後瀘桶內積存很多廢物，濾棉亦開始塞，但潛水泵有理無理照樣 1200L/hr 咁谷水入瀘桶，好易谷爛 o-ring 漏水，甚至谷爆！

24x · **發表於 :** 2006-09-15 10:35

U may consider water pass through the negative presssure approach (the same method used by 濾桶). U can connect the 濾桶 and then 潛水泵....PS it's better to use the wet/ dry 潛水泵 to do this

Andy Kong · **發表於 :** 2006-09-15 11:03

24x 寫:

U may consider water pass through the negative presssure approach (the same method used by 濾桶). U can connect the 濾桶 and then 潛水泵....PS it's better to use the wet/ dry 潛水泵 to do this

yes, that's the method I used before, it works, but the connection is not simply, and it is difficult to "start" the filter to work after you clean your "filter", besides, I don't see this as a cheaper alternative if we are talking about 1000L/hr to 1200 L/hr only, buying a bigger filter is always cheaper and convenient. A good wet/dry pump that works as silent as an external filter will cause more then the filter already

水草情迷

[問題]潛水泵會否推爆濾桶?

誰在線上