水草情迷

大家好,本人開缸兩星期了,水質也有好轉,不過個CO2擴散器有Ｄ?,
我個杯是有螺旋那隻,但有出氣時氣不經螺旋器出泡,而在底部個隆出氣,
但杯已水滿,真不知點解,有兄弟能幫忙嗎?

"但有出氣時氣不經螺旋器出泡,而在底部個隆出氣,
但杯已水滿,真不知點解,"
我想你的擴散杯已經break啦,換個或買一個新的

有個洞是正常的
你可以試下加大你的 CO2 壓力
氣泡便不會由螺旋管底的洞出來
其實由那處出來都無問題的
只係無0左計泡的功能
加個外置計泡仲好啦!

睇量下大陸係咁上下，換個隻都係$38蚊，其實唔換都可以，我啱啱買左隻都係咁，我都冇理佢照用！

又唔係太貴...不如買過隻啦....o係發記有3x 蚊o個隻o架~

買過個啦!!!不如買個ADA的擴散器...d泡好細好正!!不過都係玻璃,小心d..唔好再整裂

I think you could erase this problem by simply shutting down the supply of CO2 for one night. After that, the water will automatically fill up the CO2 diffuser. You should then turn on the CO2 supply at next day and the bubbles will easily pass through the spiral glass tube and operates normally. One thing you should make sure is that you MUST have a check valve to prevent water from getting into the CO2 bottle while you turn off the CO2.

玻璃既就真係要小心d
我試過一買番黎.......
整喉之際...
"啪"一聲
咁就俾我玩到.......
唉...
d錢咁就冇佐.....
好彩唔係用杯咋

sorry.......
我既意思ada 杯..

咁多位,我順便都有個問題....
我見倒擴散器有三個轉有d五個轉,有咩分別?

冇分別, 外形上o既問題. 那些轉是用來作計泡功能.

_________________
多多交流, 多多研究, 多多搜尋
我的水族相簿

我都有這個問題！但加大Co2壓力(每秒6粒泡泡)就Okay啦！環多一點容易D計數嗎！對溶解度沒影響。