水草情迷

缸: 48"長18"濶20"高
燈: glo t5ho 2set (共4管)
水冷: dba-200
濾桶: eheim 2217 (舊有)

現需加多一个大濾桶. 之前係度問過話eheim 2260. 不過見有人用2028兩个搞掂,咁如果加2260會唔會太大呢?

問題1
依家考慮緊eheim 2075, 2076, 2078, 2080, 2260, fx5. 唔知邊个最適合.

問題2
另外就係出入水管既問題. 2260 及 fx5, 好似用唔到ada 玻璃出入水管(ada 玻璃出入水管好似得12/16及16/22),大水流玻璃會唔會有問題? 如果用fx5原裝出入水管放係後景,咁咪吹到後景高草打大風? 放係前面又好似唔係好靚.

問題3
我用ista外置co2 溶解器,應該係12/16,咁咪唔可以用(因喉size問題)?

ista外置co2 溶解器, 不過係大碼

謝謝各位師兄幫幫忙

乞求andy kong 回覆

forget about the fx5, maybe i just stay with eheim.
why? i just go through the review. the fx5 is much noise than the eheim. also, the water tube is a problem for replacement or if you need extra length to connected to the chiller. It is because i will have the chiller to be connected. but, fx5 may release water from the bottom of the canister, which is a good function.
anyway, i would rather to stay with eheim but didn't know which speed i should go for. (i have another canister of 2217)...... thanks~

一 樣係4呎缸,我用2260推水冷,2217推擴散筒,2260出入水係16/22,25/3x唔記得,我就大喉套細喉,用彷ada16/22出入水,

無打風咩? 想問問个櫃要幾高連喉位? 我个櫃得80cm高,加埋上下木皮夾板可能真係唔夠

andy is right. just checked the dba-150 chiller flow rate recommend, it should be minimum (1800L/h) to maximum (7000L/h) from their website.
In this case, i will properly get a either 2260 or fx5.
fx5 advantage
1. can pump up the air to start up
2. can release water from bottom so not necessary to carry the heavy canister for cleaning
3. come with nice water in/out flow and parts to fix the tube onto the tank
4. easier cleaning
fx5 disadvantage
1. ugly water tube
eheim 2260 advantage
1. bigger volume to put the fiter materials
2. easier to get the parts
eheim 2260 disvantage

I will properly go for fx5 because of the start up process and clean up process. i am a stupid user and always get start up after cleaning even for my eheim 2217. so, it is really helpful.
got a few question for fx5
1) it can not install the ada in/out flow glass, right?
2) IF the water tube is not long enough or broke it somehow. Is it easy to buy spare one anywhere in Hong Kong?
Link of the installation for the fx5.
http://vlog.xuite.net/play/eTJTWnRGLTE2NDMxNzMuZmx2 part 1
http://vlog.xuite.net/play/dk1DYmptLTE2NDMzNzAuZmx2 part 2
http://vlog.xuite.net/play/RVlUb2VDLTE2NDQyOTcuZmx2 part 3

now, consider about the noise issue only.

$450?so expensive.i have use something similar,doesn't like it,take up too many space inside,now use霧化器,very good

_________________
eheim2075 +eheim 2113
ada grand solar2,hariley 150A,75cmx45cmx45cm

andy kong,
you have use both fx5 and 2260, right? tell me what is more preferrable and the noise issue?
and for such big flow rate, where is the in/out flow should be position? (as there will be tall plant at the back. but, for hiding the in/out flow, it is better to hide them at the back.)

please help, master!

it is from the taiwan website and is not hkd. i bought it for $88. middle size is $68.

this is is putting outside, not inside. and the co2 溶解 better than any other one that i have tried.

for my experience, if you use 2 bubble/sec in the 霧化器, you can use 1 bubble/sec for this 溶解器.

how to connect to the dba-200 chiller to the fx5 or 2260 (fx5 is not the regular tube)? will the hose fit to the canister?
sorry of so many question