4呎缸濾桶問題

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

eheim 2260 :
output 16/22 mm
intake 25/34 mm

咁output去chiller,ista溶解器,ada玻璃出水管應該無問題
但係intake 係25/34 , 請問有冇d converter 係 25/34轉去16/22架?

接駁 : 2260>chiller>co2溶解器?ada玻璃出水管入缸岩唔岩呀?

Andy Kong · **發表於 :** 2010-04-16 01:22

Yes, I used both for quite a while, and I still have a FX5 running at cafe. If the price different is not an issue, then I definitely will go for 2260. FX5 is strong in mechanical filtering, but not enough room for 生物環, I am using it at my cafe because I use a 滴漏沙缸 in that setup, so I have plenty of space for 生物環 already。

To connect with the chiller, you have to connect the water out from 2260 and connect to the water-in of the chiller. Check if the dba-200 come with accessories that fit into the 25/32 軟喉, if not, then they should have something that cope with 19/27 軟喉, connection between these two host is pretty straight forward, you can go to 五金鋪 buy a small 灰喉配件 called 「4分/3分刁士」，用熱水浸軟膠喉，就咁塞個刁士入膠喉，然後加喉箍。

I have not used the 大碼 ISTA外置co2 溶解器 so can't comment how suitable it is when used as an external device, sorry.

Andy Kong · **發表於 :** 2010-04-16 01:31

leoo11 寫:

eheim 2260 :
output 16/22 mm
intake 25/34 mm

Don't do this.
the original output from 2260 is 25/34, if you change it to 16/22, you have reduce the cross section area by at least 60%
Cross section of 25/34 = 3.1416 x 25 x 25
Cross section of 16/22 = 3.1416 x 16 x 16

You will reduce the efficiency of 2260 significantly, and in the long run, shorter the life of the Eheim pump.

Using 19/27 on 2260 is the maximum reduction I recommend, 16/22 is definitely a NO

leoo11 寫:

咁output去chiller,ista溶解器,ada玻璃出水管應該無問題
但係intake 係25/34 , 請問有冇d converter 係 25/34轉去16/22架?

接駁 : 2260>chiller>co2溶解器?ada玻璃出水管入缸岩唔岩呀?

Don't use 2260 if you MUST use ada玻璃出水管，if you insist, I suggest you split the 25/34 output from 2260 into TWO set of 16/22, and then use TWO ada玻璃出水管。

You should connect ista溶解器 to 2217 instead, not 2260

arwai14 · **註冊時間:** 2006-01-15 02:19 **文章:** 216

我覺得用2260, 分流到唔同器材, 會好o的. 有大食大.
converter 方面, 你可用灰喉黎做.

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

Andy,
thanks again. in this case, eheim 雨林管 is the only choice? is there anything in clear/grey color which can be substitute? (雨林or鴨咀, just anything i can use except the green)
:grin:

i just feel that the eheim green water tube and 雨林管 look like a monster.
just wonder is there any good grey/clear water tube from the market which is 12/16, 16/22 & 25/34? any brand necessary or just any from the market? :grin:

just want to change it instead of the monster color one from eheim.
then i will connect the co2 with 2217 then.
for the chiller 25/34, let me check it out. if it doesn't have the parts for the bigger tube, i ask you again. i don't really know what to get from the metal shop as you said above. :grin:

i am stupid in these things.
for the output to the tank, you recommend to use 雨林管 (with 25/34 tubing)? then should i install on the side of the tank and shooting the same directing as the 2217 ada one? (left to right or right to left, but not front and back)
:grin:

I was planning to make the shelf 80cm similar to the ada. but, the 2260 is quite tall and not sure if it will fit into the shelf. if not, then i might have to make the shelf few inches taller.

附加檔案:

wood.jpg

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

arwai14 寫:

我覺得用2260, 分流到唔同器材, 會好o的. 有大食大.
converter 方面, 你可用灰喉黎做.

i am stupid on these things. new hand to all equipment.

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

Andy,

all is okay now. water from the tank to the 2260 by a 25/34 tube. if i can't find any subsitute, then i will use the eheim 花藍. (but that can be replace later)
for the output from eheim 2260 to the 水冷 by a 16/22 is okay. from 水冷 to ista 溶解器 by 16/22 is also okay, so i can use the ada glass outflow.

i will post out the photo after i got the tank and shelf later.

thank you so much for your help once again!

Andy Kong · **發表於 :** 2010-04-16 23:23

leoo11 寫:

arwai14 寫:

我覺得用2260, 分流到唔同器材, 會好o的. 有大食大.
converter 方面, 你可用灰喉黎做.

i am stupid on these things. new hand to all equipment.

學下用灰喉配件吧，非常易用的，我相信只有懶惰唔學用，無可能會學唔識的，買時叫五金鋪買埋灰喉膠水 ($5)，同你講解一次，然後你買三五十 $ 配件返來左搭右，右搭左咁試下就識架啦！

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

Andy Kong 寫:

leoo11 寫:

arwai14 寫:

我覺得用2260, 分流到唔同器材, 會好o的. 有大食大.
converter 方面, 你可用灰喉黎做.

i am stupid on these things. new hand to all equipment.

學下用灰喉配件吧，非常易用的，我相信只有懶惰唔學用，無可能會學唔識的，買時叫五金鋪買埋灰喉膠水 ($5)，同你講解一次，然後你買三五十 $ 配件返來左搭右，右搭左咁試下就識架啦！

WHAT IS 灰喉?

arwai14 · **註冊時間:** 2006-01-15 02:19 **文章:** 216

leoo11 寫:

Andy Kong 寫:

leoo11 寫:

arwai14 寫:

我覺得用2260, 分流到唔同器材, 會好o的. 有大食大.
converter 方面, 你可用灰喉黎做.

i am stupid on these things. new hand to all equipment.

學下用灰喉配件吧，非常易用的，我相信只有懶惰唔學用，無可能會學唔識的，買時叫五金鋪買埋灰喉膠水 ($5)，同你講解一次，然後你買三五十 $ 配件返來左搭右，右搭左咁試下就識架啦！

WHAT IS 灰喉?

你去五金店問就知, 灰喉+波子製+快插, 咁你基本上想做乜都得.

Andy Kong · **發表於 :** 2010-04-17 21:13

arwai14 寫:

leoo11 寫:

Andy Kong 寫:

leoo11 寫:

arwai14 寫:

我覺得用2260, 分流到唔同器材, 會好o的. 有大食大.
converter 方面, 你可用灰喉黎做.

i am stupid on these things. new hand to all equipment.

學下用灰喉配件吧，非常易用的，我相信只有懶惰唔學用，無可能會學唔識的，買時叫五金鋪買埋灰喉膠水 ($5)，同你講解一次，然後你買三五十 $ 配件返來左搭右，右搭左咁試下就識架啦！

WHAT IS 灰喉?

你去五金店問就知, 灰喉+波子製+快插, 咁你基本上想做乜都得.

http://www.tamsimon.com/discuz/viewthre ... a=page%3D1

Hope this can help.

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

thanks andy,

why do i need this? what is the advantage from the soft tube? anyway, i am sure i will not have the permit for this.

by the way, is there any soft water tube in clear or grey color that I can buy for my eheim (12/16, 16/22 & 25/34)? any brand required or anything from fs?

Andy Kong · **發表於 :** 2010-04-18 02:44

leoo11 寫:

thanks andy,

why do i need this? what is the advantage from the soft tube? anyway, i am sure i will not have the permit for this.

by the way, is there any soft water tube in clear or grey color that I can buy for my eheim (12/16, 16/22 & 25/34)? any brand required or anything from fs?

Leo, you are not listening.

You can use 灰喉 to fit with Eheim tube
for 25/34mm 膠喉，you can use 20mm 灰喉 (或叫 6 分灰喉)
for 19/27mm 膠喉，you can use 15mm or 16mm 灰喉 (或叫 4 分灰喉)
for 16/22mm 膠喉，you can use 13mm 灰喉 (或叫 3 分灰喉)
No matter how you want to twist your water path, you can always do that with 灰喉 and 灰喉配件

You don't want to try at all, but you are blaming your wife will not give permit to you.

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

andy,
maybe i misunderstood or something. 灰喉 is the hard pvc one, right? the link that you sent to me is the parts accessories of hard pvc one. I have seen this type of things in fish shop and the whole tube is in this type of material. since I am always moving around every 2 years, so I think it is more convenience witht the soft water tube.
:grin:

i am not blaming my wife and i also think the soft one in clear colors would looks better instead.

leoo11 · **註冊時間:** 2010-01-19 01:21 **文章:** 776

揾左d圖,真係有d抗距.
:grin:

我都係選擇普通軟喉但旨係想透明或灰色. :grin:

係咪係fs普通喉就得唔洗牌子

附加檔案:

PICT2012.jpg

附加檔案:

PICT2016-1.jpg

水草情迷

4呎缸濾桶問題

誰在線上